U696ZZ U Groove Ball Bearings 6x22x7mm Double Shielded (GCr15) B

Note：

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on Both or Single side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

• Single-row, pre-lubricated, normal accuracy.
• Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
• With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
• Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance
• Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

Selection Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:

Model: U696ZZ 

Shielded Type: Double Shielded

Inner Race/Outer Race Material: Chrome Steel (GCr15) / Nylon

Cage Material: Stamping Steel

Inner Diameter (d): 6mm

Outer Diameter (D): 22mm

Thickness (B): 7mm

Groove width: 3.7mm 

Groove depth: 1.5mm

Accuracy Class: P0 (ABEC1)

Noise Level: Z2

Number of Pack: 2Pcs

Tags:$0 - $20,Ball Bearings,Bearings,Deep-Groove Ball Bearings,Industrial Equipment,Power Transmission,Power Transmission Products,Radial Ball Bearings,Tools

Title - Default Title